Bostwick-Braun Industrial | Apex Tool Group

Filter

Search Within Brand

: In Stock Only
: Adjustable Wrenches (29)
Air & Multi-Purpose Hoses (1)
Alloy Steel Pipe Fittings (2)
Anchor Shackles (2)
Automotive Filter Wrenches (2)
Automotive Specialty Tools (3)
Ball Pein Hammers (4)
Bit Screwdrivers (1)
Blocks & Sheaves (2)
Bolt Cutters (3)
: 5/32 in (1)
: 0JT (1)
2JT (1)
3JT (2)
3MT (1)
4MT (1)
: +/-1.5 % (1)
+/-2% CW, +/-3% CCW (1)
+/-3 % (2)
+/-3% (1)
+/-3% CW (4)
+/-3% Clockwise (1)
+/-7% Clockwise (1)
: Female x Female (2)
Female x Male (3)
: Aircraft Cable, Piano Wire and Soft Wire Rope/Cable (1)
Cardboard, Craft, Fabric and Paper (1)
Cardboard, Heavy Fabric, Leather, Paper, Plastic And Rope (1)
Cardboard/Tape/Paper/Thin Plastics/Sheetrock (2)
Carpet, Drapery, Fabrics and Upholstery (1)
Copper, Brass, Aluminum and Thin-Wall Conduit (1)
Linoleum, Carpet Fabrics, Roofing and Sheet Materials (1)
Soft, Medium and Hard Materials (1)
Vinyl, Plastics, Cardboard, Rope, Wire, Cable, Siding, Roofing (2)
: 1-3/4 in (1)
150 mm (2)
9 in (3)
: Long (16)
Short (7)
: Clevis (3)
Eyelet (2)
Jaws and Clevis (1)
Push-On (1)
: Magnet and Hang Hook (1)
: Ball (3)
Plain (3)
Super Ball (1)
: 0.787 in (1)
0.866 in (2)
0.945 in (1)
0.984 in (3)
1 in (1)
1-3/4 in (1)
1-3/8 in (1)
1.181 in (1)
1.35 in (5)
11/16 in (1)
: 1/4 in (5)
19 mm (1)
22 mm (1)
27 mm (1)
3/16 in (2)
3/4 in (1)
3/8 in (4)
4 mm (1)
5 mm (1)
5/16 in (2)
: Ball Hex (2)
Hex (13)
Hex Socket (1)
Phillips® (1)
: Hood (1)
Sharp Point (1)
: 0.097 in (1)
0.098 in (1)
0.196 in (1)
0.235 in (1)
0.236 in (2)
0.237 in (3)
0.238 in (1)
0.315 in (3)
: 10 ft (4)
100 ft (6)
12 ft (5)
12 in (1)
15/16 in (1)
150 ft (2)
16 ft (8)
2-1/2 in (1)
2-1/4 in (2)
2.4 in (1)
: Alloy Steel (3)
Black Oxide Coated (1)
Carbon Steel (1)
Chrome Clad (1)
Fiberglass (6)
Forged Alloy Steel (1)
High Carbon Steel (1)
Light Steel & Vinyl (1)
Low Carbon Steel (7)
Molybdenum Steel (1)
: Straight-Edged (1)
: 1-3/8 in L (1)
1.25 in (2)
1.375 in (3)
1.5 in (1)
1.62 in (1)
10-1/2 in L (1)
2 in L (2)
2-7/8 in L x 0.3 in W (1)
3 in (1)
3-1/2 in L (1)
: Hook (1)
: 0.026 in (1)
0.03 in (1)
0.033 in (1)
0.038 in (1)
0.04 in (2)
0.042 in (1)
0.046 (1)
0.046 in (1)
0.584 in, 0.61 in, 0.635 in, 0.66 in, 0.711 in, 0.762 in, 0.813 in, 0.889 in (1)
0.599 in, 0.635 in (1)
: Fixed (1)
Flat (1)
Folding (1)
Hook Blade (1)
Precision Ground/Wide (1)
Serrated (4)
Sharp (2)
Straight (1)
: 0.134 in (1)
0.151 in (1)
0.275 in (1)
1 in (17)
1-1/4 in (1)
1-1/8 in (1)
1-3/16 in (3)
1/2 in (16)
1/4 in (5)
19 mm (1)
: 0.055 in (1)
0.065 in (1)
0.077 (1)
0.09 (1)
0.107 (1)
0.128 in (2)
0.134 in (1)
0.15 in (2)
0.151 (1)
0.151 in (1)
: Alloy Steel (25)
Carbon Steel (1)
Drop Forged Carbon Steel (21)
Forged Alloy Steel (1)
Forged Alloy Tool Steel (1)
Heat Treated Alloy Steel (3)
Steel (2)
: 0.09 in (1)
0.134 in (3)
0.157 in (5)
0.177 in (2)
0.197 in (3)
0.209 in (1)
0.217 in (17)
0.22 in (14)
0.27 in (1)
0.276 in (4)
: 1/2 to 4 in (1)
: 0.193 in (1)
0.21 in (1)
0.217 in (1)
0.22 in (1)
0.24 in (1)
0.256 in (3)
0.272 in (5)
0.29 in (1)
0.296 x 0.312 in (1)
0.303 in (3)
: 0.34 in (1)
0.535 in (1)
0.562 x 0.656 in (1)
0.61 in (1)
0.654 in (2)
0.656 x 0.734 in (1)
0.665 in (2)
0.697 in (1)
0.7 x 0.87 in (1)
0.701 in (1)
: 1/8 in (1)
3/16 in (2)
5/16 in (2)
5/8 in (1)
: Rope (2)
: 1-3/16 in (1)
1/2 in (1)
: 0.04 to 0.25 in (2)
0.08 to 0.5 in (1)
0.18 to 0.8 in (1)
1-1/4 to 3 in (1)
1/32 to 1/2 in (1)
1/8 to 3/4 in (1)
1/8 to 5/8 in (1)
100 lb (1)
1280 cu-in (1)
15.4 cu-ft (1)
: 5 x 2 in (2)
: 26 mm (1)
: G70 to G43 (1)
: 1/4 in (1)
: 5/16 to 3/8 in (1)
: 1/2 x 6 in (1)
1/4 in, 4-3/4 in, 3/8 in, 5-1/2 in, 6-5/8 in, 6-1/2 in (1)
5/8 in, 6-1/2 in, 3/4 in, 7-7/8 in, 7-1/2 in, 1 in, 8 in (1)
: Cold (4)
: 500 lb (1)
: Curved (1)
Rip (1)
: 3.09 in (1)
: Bastard (30)
Fine (1)
Smooth (2)
: Black (5)
Black Handle (4)
Black and Molten Orange (10)
Black/Gray/Rawhide (1)
Black/Molten Orange (18)
Black/Red (8)
Blue (3)
Brown (9)
Clear/Yellow (1)
Gray/Red (1)
: Standard Utility Knives (1)
Utility knives (1)
: 1/8 in (1)
: Blow Mold Case (3)
Blow Molded Case (29)
Box (3)
Carded (2)
Metal Box (1)
Social Rail (1)
Socket Rail (8)
Storage Case (2)
: 5 Ft 2-Wire (1)
: Yes (1)
: 96 sq-ft (1)
: Bastard (2)
Bastard Single (1)
Bastard Single Cut Smooth (1)
Bastard Smooth Rasp Single Double (2)
Center (1)
Double (6)
Double/Smooth (3)
Flat Double (2)
Flush (3)
Heavy Duty Shear (1)
: No (7)
Yes (9)
: 1/16 in (1)
1/4 in (1)
18 ga Low Carbon Steel, Rolled steel (6)
20 ga Low Carbon Steel (2)
23 to 19 AWG (1)
24 ga Cold Rolled Steel (1)
3/8 in (1)
: Right Hand (4)
: Forged Alloy Steel (1)
: 20 in (1)
20.399999999999999 in (1)
24 in (1)
30 in (1)
60 in (2)
: 0.69 in (1)
1/2 in (2)
1/4 in (2)
1/8 in (1)
3/4 in (3)
5/8 in (1)
7/16 in (2)
7/8 in (1)
: #4-40 (1)
1/2 in (1)
: Bright (4)
: High Speed Steel (4)
: Hex (4)
: 1/2-20 (1)
M12-1.75 (2)
M18-2.5 (1)
: 0.21 in W Inside (1)
0.37 in Eye Dia x 0.34 in Opening (1)
0.4 in W (1)
0.53 in W (1)
0.58 in W (1)
0.6 in W (1)
0.74 in W (1)
0.78 in W (1)
1 in Drive (1)
1-1/8 in OAW x 1 in OAH (1)
: LED (1)
: 35 in (1)
4.9 in H x 31.7 in W x 18.5 in D Top Tray, 2.8 in H x 27.5 in W x 17.4 in D 2-Drawer, 3.2 in H x 32.1 in W x 20.2 in D Bottom Tray (1)
: 0.45 in (1)
0.465 in (13)
0.469 in (8)
0.492 in (1)
0.508 in (15)
0.516 in (2)
0.543 in (2)
0.55 in (1)
0.563 in (1)
0.575 in (1)
: 1 in (10)
1-1/4 in (1)
1/2 in (216)
1/2 in, 3/4 in (1)
1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in, 15/16 in in (1)
1/4 (3)
1/4 and 3/8 in (1)
1/4 in (90)
1/4 in, 3/8 in (9)
1/4 in, 3/8 in, 1/2 in (15)
: 12 Point (1)
12-Point (5)
6 Point (1)
6-Point (17)
Ball End (11)
Ball End Hex (1)
Ball/Hex (1)
Female Square (3)
Hex (89)
Hex Ball (1)
: 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 21 mm, 22 mm (1)
Yes (8)
: No (2)
: Knife (1)
Serrated (1)
Shear (1)
Square Lay-In (1)
: Socket (2)
: 5/8 in (2)
: 0.34 in (1)
0.51 in (1)
3/4 in (2)
3/8 in (1)
5/8 in (1)
: 1-1/4 in (2)
1-1/8 in (1)
1-3/4 in (2)
1-7/16 in (1)
11/16 in (1)
15/16 in (2)
2 in (2)
2-3/8 in (3)
2-5/8 in (2)
3 in (1)
: 0.32 in (1)
0.56 in (1)
3/8 in (1)
: 0.906 in (1)
1-3/4 in (2)
1.1 in (1)
1.25 in (1)
1.38 in (2)
1.53 in (1)
1.8 in (1)
1.9 in (1)
2-3/4 in (2)
7/8 in (1)
: Polished (1)
Soft (1)
: Ball Peen (1)
Ball Pein (1)
Double (5)
Flat (1)
Polished (2)
Striking (1)
: 1 in (1)
1/2 in (7)
1/4 in (3)
3/4 in (5)
3/8 in (4)
7/16 in (1)
: Half Round, Round and Square File (1)
: Anodized (2)
Anodized Aluminum (1)
Black (3)
Black Nickel Chrome (1)
Black Oxide (125)
Black Phosphate (10)
Bright (1)
Bright Plated (1)
Chrome Molybdenum (1)
Chrome Plated (2)
: Black Oxide (36)
Black Oxide with Polished Face (1)
Bright/Full Polished Chrome (5)
Chrome Plated (1)
Chrome Vanadium Steel (1)
Full Polish Chrome (25)
Full Polished (2)
Gunmetal Gray (5)
Manganese Phosphate Coated (9)
Natural (2)
: Plug (2)
: 11 AWG (1)
: 12 AWG (1)
8 AWG (1)
: 16 ga (1)
: 4:1 (1)
: 100 (2)
30 (10)
30/43 (1)
70 (1)
80 (1)
: 0.1 ft-lb/0.1 N-m (1)
1 cm, 1/8 in (1)
1 ft-lb (1)
1/10 ft, 1/100 ft (2)
1/16 in (7)
1/16 in, 1/32 in (1)
1/16 in, 1/32 in (First Foot), 1/64 in (First Inch) (1)
1/16 in, 1/8 in (1)
1/8 in (3)
1/8 in, 1 mm (1)
: Comfort (3)
Comfort Grip (1)
Comfort Grip/Non-Slip (1)
Cushion (1)
Cushioned (2)
Ergonomic Cushioned (3)
Non-Slip/Textured (1)
: 240 (1)
: Ball Peen (4)
: Ambidextrous (1)
Bent (1)
Right (2)
Ring (1)
Static Dissipative (1)
: 1-5/16 in (1)
: 1 in (1)
10 in (1)
25.3 in (1)
3 in (3)
3.6 in (1)
3.8 in (1)
4 in (2)
4-1/2 in (2)
4.62 in (1)
4.7 in (1)
: 2-Tone Rubber (1)
Acetate (1)
Alloy Steel (15)
Aluminum (1)
Cast Iron (1)
Cutlery Steel (1)
Dual Material (6)
Fiberglass (10)
Formed Steel (1)
Hard Plastic (1)
: 1/2 in (2)
1/4 in (1)
1/8 in (1)
11 in L (1)
3/16 in (1)
3/8 in (2)
4-7/8 in (1)
5/16 in (1)
5/32 in (2)
6 in (1)
: Bent (1)
Bent/Enlarged Bow/Offset/Ring (1)
Comfort Grip (7)
Comfort Grip/Ergonomic (1)
Comfort Grip/Knurled (1)
Comfort Grip/Ring (1)
Comfortable Grip Or Dual Dipped (1)
Contoured (12)
Contoured/Standard (1)
Curved Back (1)
: 0 deg (8)
15 deg (15)
180 deg (1)
22.5 deg (1)
30 deg (1)
: 2-7/8 in (1)
3.3 in (1)
3.9 in (1)
4.1 in (1)
4.3 in (1)
4.6 in (1)
4.81 in (1)
4.812 in (1)
4.9 in (1)
5-3/8 in (1)
: Alloy Steel (4)
Brass (1)
Forged Alloy Steel (2)
Forged Steel (5)
Polyurethane (6)
Steel (3)
: Compact (1)
Roto (2)
Round (2)
Slim (1)
Teardrop (29)
: 2.812 in L x 2.812 in W (1)
: Enclosed Ratchet (1)
Fixed (1)
Interchangeable (1)
Low Profile Flexible (1)
Ratcheting (2)
Rigid (2)
Teardrop (4)
: 0.2 lb (1)
1.9 lb (1)
1.95 lb (1)
12 oz (1)
128 oz (1)
16 oz (3)
18 oz (1)
20 oz (3)
24 oz (3)
28 oz (1)
: 1-1/8 (1)
1.8 in (1)
2-3/4 in (1)
: 1-3/4 in (1)
27-3/4 in (1)
33.38 in (1)
39 in (1)
42 in (1)
50 in (1)
51 in (1)
: 1/4 (4)
17 mm (1)
2 to 12 mm (1)
9/16 in (1)
9/64 in (1)
: 0.028 to 3/4 in (1)
0.05 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in (1)
0.05 to 0.375 in (1)
0.05 to 3/16 in (1)
0.05 to 3/8 in (3)
1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm (1)
1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 9 mm, 10 mm (1)
1.5 to 10 mm (2)
1.5 to 6 mm (1)
1/4 in, 5/16 in, 3/8 in (1)
: 0.04 to 0.5 in (1)
0.08 to 0.5 in (1)
0.135 to 0.156 in (1)
0.18 to 0.8 in (1)
1/8 to 3/4 in (1)
: No (11)
Yes (91)
: 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in (1)
1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in, 15/16 in, 1 in, 1-1/16 in, 1-1/8 in, 1-3/16 in, 1-1/4 in (1)
1/2 to 1-1/16 in (1)
1/2 to 1-1/8 in (1)
1/2 to 15/16 in (1)
1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in (1)
1/4 in, 7 mm, 8 mm (5/16 in), 3/8 in, 10 mm, 11 mm (7/16 in), 12 mm, 13 mm (1/2 in), 13 mm, 14 mm (9/16 in), 9/16 in, 16 mm (5/8 in), 17 mm, 11/16 in, 19 mm (3/4 in) (1)
1/4 in, 7 mm, 8 mm, (5/16 in), 3/8 in, 10 mm, 11 mm, (7/16 in), 12 mm, 13 mm, (1/2 in), 13 mm, 14 mm, (9/16 in), 9/16 in, 16 mm, (5/8 in), 17 mm, 11/16 in, 19 mm, (3/4 in) (1)
1/4 to 1 in (3)
1/4 to 1 in, 6 mm to 19 mm (1)
: Buzzer with LED Light (1)
: 1-1/4 in (2)
1-1/8 in (1)
1-15/16 in (2)
1-3/4 in (1)
1-7/16 in (2)
2-13/16 in (2)
2-7/16 in (1)
3-1/8 in (2)
3-3/4 in (2)
4-1/2 in (1)
: 0.29 in (1)
1-1/4 in (2)
1-13/16 in (2)
1-5/32 in (1)
1-9/16 in (1)
2-1/16 in (2)
2-1/2 in (2)
2-15/16 in (2)
25/32 in (1)
27/32 in (2)
: 1/4 in (1)
: No (27)
: No (1)
: 0 to 2-7/8 in (1)
2 in (1)
: 1-7/8 in (2)
1.84 in (1)
2 in (1)
2-21/32 in (1)
2.75 in (1)
3 in (1)
3.15 in (1)
: Alloy Steel (40)
Cast Iron (2)
Chrome Vanadium Steel (1)
Forged Alloy Steel (9)
Forged Carbon Steel (1)
Steel (5)
: 1-1/2 in (1)
3/4 in (1)
6 in (1)
9 in (1)
: 2.625 in, 4 in (1)
5-3/4 in (1)
: 0.75 in (1)
0.75 in L x 1 in W x 0.4 in THK (1)
1 in (1)
1 in L x 0.906 in W X 0.468 in THK (1)
1 in L x 1 in W X 0.437 in THK (1)
1 in W x 5/16 in THK (1)
1-1/16 in L x 3-5/8 in W x 19/32 in Thk (1)
1-1/2 in (1)
1.13 in W x 2.14 in L x 0.48 in Thk (1)
1.15 in W x 0.3 in Thk (1)
: Serrated (3)
Smooth (1)
: Straight (1)
: 0.2 in (1)
0.28 in (2)
0.29 in (1)
0.3 in (3)
0.4 in (4)
0.562 in (1)
0.59 in (1)
0.69 in (2)
0.88 in (1)
1/2 in (2)
: Beveled (3)
C-Clamp (4)
Convertible (3)
Curved (6)
Diagonal (1)
Flush Compound (1)
Long Nose (3)
Needle Nose (2)
Round (1)
Serrated (3)
: 0.12 in (1)
0.16 in (1)
0.68 in (1)
0.687 in (1)
0.84 in (1)
1.22 in (1)
1/2 in (1)
11/16 in (3)
2.07 in (2)
2.48 in (2)
: K3 (1)
K32 (1)
K3C (1)
K4 (3)
K7 (1)
: 1-5/16 in (1)
1-7/8 in (1)
1.1 in (1)
1.36 in inside (1)
10 in (12)
100 ft (6)
12 in (7)
12.62 in (1)
138 ft (1)
14 in (2)
: 1-3/8 in (1)
1.62 in (1)
2-7/8 in (1)
3-1/2 in (1)
3-3/4 in (1)
4 in (2)
5 in (1)
8 in (1)
: 12 in, 17 in and 25 in (1)
8 in, 10 in and 16 in (1)
: 0.9 (1)
: Double Loop (3)
Single (2)
Single Jack (1)
Single Loop/Straight (7)
Spring Snap (1)
Straight (1)
Twisted (1)
: 0.5 ton (1)
0.75 ton (1)
1 ton (2)
1.5 ton (1)
10 lb (1)
1000 lb (1)
106 lb (2)
110 lb (1)
115 lb (1)
12 ton (1)
: 7/32 in Drill Hole (1)
Ball (10)
Door (1)
Pin (28)
Plain (2)
Spring (3)
: 500 Lumens (1)
: No (2)
: No (20)
Yes (6)
: 1 in (1)
1/2 in (9)
1/4 in (2)
3/4 in (3)
3/8 in (9)
5/8 in (1)
: Black (1)
Black/Red (1)
: 304 Stainless Steel (1)
Alloy Steel (677)
Alloy Steel with S2 Steel Bit (12)
Aluminum (4)
Carbon Steel (11)
Chrome Molybdenum Alloy (1)
Chrome Molybdenum Alloy (Cr-Mo) (1)
Chrome Molybdenum Alloy Steel (164)
Chrome Vanadium Steel (5)
Chrome-Molybdenum (3)
: Acsr, Acar, Zebra, Self-Supporting Telephone Cable (1)
Soft and Medium Materials (1)
: 0.226 in (1)
: 6-3/4 in (1)
: 3/8 in (2)
: 4 in (1)
: 5 in (1)
: 227 ft-lb (1)
: 750 ft-lb (1)
: No (4)
Yes (12)
: Imperial (437)
Imperial/Metric (5)
Imperial/Metric/SAE (5)
Imperial/SAE (120)
Metric (294)
Metric/Imperial (2)
Metric/SAE (13)
SAE (114)
Sae/Metric (5)
Torx (10)
: Imperial (13)
Imperial/Metric (3)
Metric (7)
SAE (2)
SAE/Metric (3)
: 3 deg (9)
4 deg (8)
4.3 deg (2)
5 deg (8)
8.4 deg (1)
: 3 (1)
: 1/2-20 (1)
33JT (1)
3JT (3)
4JT (1)
: Jacobs Taper (4)
Morbs Taper (2)
Taper Shank (4)
Threaded (1)
: 0.9 (1)
: 1-1/2 in (2)
1-1/4 in (2)
1-13/16 in (1)
1-3/4 in (1)
1-7/8 in (1)
1.5 in (1)
11 AWG (2)
11 in (1)
11/16 in (1)
12 AWG (2)
: 1/16-27 in (1)
1/4-18 in (1)
: No (2)
: 4 (1)
: 2 (1)
7 (1)
: 1 (2)
: 15 (1)
32 (1)
: 3 (1)
: 1 (1)
4 (1)
8 (1)
: 120 (1)
24 (1)
43 (1)
45 (5)
60 (10)
72 (34)
84 (2)
90 (19)
: 2 or 3 (3)
3 (1)
: 1 (1)
10 (24)
11 (10)
110 (1)
114 (1)
118 (1)
12 (21)
13 (20)
14 (12)
148 (1)
: 10 (1)
12 (282)
2 (1)
23 (1)
6 (284)
6 & 12 (2)
6 and 12 (5)
: 19 (1)
3 (1)
4 (1)
8 (1)
: 0 deg (9)
0 or 15 deg (6)
0/15 deg (1)
15 deg (37)
: 0.177 in (1)
0.181 in (3)
0.193 in (1)
0.213 in (3)
0.224 in (3)
0.252 in (2)
0.272 in (2)
0.287 in (1)
0.29 in (1)
0.291 in (1)
: 0.567 in (3)
0.654 in (1)
0.665 in (1)
0.697 in (1)
0.768 in (4)
0.78 in (1)
0.81 in (1)
0.862 in (3)
0.95 in (1)
0.953 in (2)
: 2.43 in (1)
2.93 in (1)
3.95 in (1)
86.9 mm (1)
: 0.138 in (2)
0.157 in (3)
0.197 in (10)
0.201 in (4)
0.209 in (1)
0.217 in (1)
0.22 in (1)
0.236 in (3)
0.24 in (1)
0.256 in (1)
: 1-1/16 in (1)
1-1/4 in (2)
1-11/16 in (2)
1-13/16 in (2)
1-7/16 in (2)
13/16 in (2)
15/32 in (1)
17/32 in (2)
2 in (1)
2-1/4 in (1)
: 1.79 in (1)
2 in (1)
3.01 in (1)
64.5 mm (1)
: 20 in W x 7-3/4 in D x 8-1/2 in H (1)
8-1/4 in W x 16 in D x 11 in H (1)
: 6-3/8 in (1)
: 12 in (1)
2-1/2 in (1)
2.5 in (1)
22 in (1)
27-1/2 in (1)
60-3/4 in (1)
63-1/2 in (1)
: 0.457 in (1)
0.492 in (1)
0.88 in (1)
0.965 in (21)
0.98 in (2)
0.984 in (41)
1 in (40)
1-1/2 in (8)
1-1/2 in, 3 in, 6 in, 12 in (1)
1-1/4 in (5)
: 1-1/4 in (1)
: 0.59 in (1)
0.61 in (1)
0.715 in (1)
0.725 in (1)
1/2 in (1)
1/4 in (2)
12 in (2)
13 in (1)
2.7 in (1)
20 in (1)
: Blow Mold Case (2)
Box (2)
: 3/8 in (1)
7/32 in (1)
: 1 in (2)
1-1/2 in (1)
1-1/4 in (2)
1-1/8 in (2)
1-3/8 in (1)
1-5/8 in (1)
1/2 in (1)
2-1/4 in (2)
3/4 in (1)
3/8 in (2)
: Alloy Steel (20)
Heat Treated Alloy Steel (1)
: Bolt (2)
Screw (20)
: Internal/External (1)
Tongue and Groove (1)
: #0 (4)
#00 (1)
#1 (8)
#10 (1)
#2 (17)
#20 (1)
#25 (1)
#3 (8)
#30 (1)
#4 (1)
: Finder Sleeve, Slotted (1)
Hex (32)
Phillips (3)
Phillips® (23)
Sel-O-FitВ® (1)
Slotted (22)
Square Recess (3)
Square Recessed (7)
Stubby Phillips (1)
Torx (4)
: (2) AA Alkaline Batteries (1)
: 16, 18N, 36 (1)
: 1-1/2 lb (1)
: 3/8 x 5 in, 1/8 x 5 in, 5/32 x 5-1/4 in, 3/16 x 5-1/2 in (1)
5/16 in (1)
: Center (3)
Drift (1)
Hex (6)
Pin (1)
Starter (3)
Taper (1)
: No (22)
Yes (6)
: Bar (1)
: Yes (40)
: 360 deg (1)
: CW (1)
CW/CCW (1)
: 3/8-24 x 4-1/2 in, 9/16-12 x 8-1/4 in (1)
9/16-12 x 8-1/4 in (1)
9/16-20 x 7 in (1)
: #2 (1)
: #0 X 2-1/2 in, #1 X 3 in, #2 X 4 in,3 X 6 in, #2 X 8 in Phillips® (2)
1/8 in x 2 in, 1/8 in x 4 in, 3/16 in x 6 in, 1/4 in x 4 in slotted screwdrivers, #0 x 2-1/2 in, #1 x 3 in, #2 x 4 in, #2 x 6 in Phillips® screwdrivers (1)
3/16 in 1/4 in 5/16 in 3/8 in #0 #1 #2 #3 Phillips®В®/Slotted (1)
Allen™ Hex (1)
Bolt Biter™ #2 x 4 in Phillips®В® Dual Material Extraction Screwdriver, Bolt Biter™ 1/4 x 4 in Slotted Dual Material Extraction Screwdriver (1)
Phillips®/Slotted (1)
Phillips®В® #00 #0 #1 #2 #3,Slotted 3/16 in 1/4 in 5/16 in 3/8 in 1.5mm 2mm 2.5mm,TorxВ® T15 T20 (1)
Phillips®В®/Slotted (1)
Phillips®В®/Slotted/TorxВ® (1)
Slotted (1)
: 173 (2)
315 (1)
419 (6)
419 Series (1)
419-S (11)
445 (1)
902 Series (1)
903 Series (1)
904 Series (1)
954 (1)
: (4) Cold Chisels, A Center Punch, (4) Pin Punches, A Long Taper Punch, and (2) Starter Punches (1)
(8) Cold Chisels, (3) Center Punches, (6) Pin Punches, (4) Long Taper (Drift) Punches, (6) Starter Punches, and A Cloth Tool Roll For Storage (1)
1/8 in, 5/32 in, 3/16 in, 1/4 in and 5/16 in (1)
82270 3/8 in x 5 in Center Punch, 82273 1/8 in x 5 in Pin Punch, 82274 5/32 in x 5-1/4 in Pin Punch, 82275 3/16 in x 5-1/2 in Pin Punch, 82264 1/2 in x 6 in Cold Chisel (1)
: +/-1% (1)
: 1/2 in (3)
: 1-1/2 in (1)
2.394 in (1)
3 in (1)
4 in (2)
6 in (3)
: Steel (1)
: #10-32 (1)
#8-32 (1)
0.117 in Dia (1)
0.15 in (2)
0.157 in Dia (1)
0.195 in Dia (1)
0.235 in Dia (1)
1/2 in (1)
1/4 (4)
1/4 in (115)
: 2MT (1)
: Hex (78)
Hex Drive (1)
Hex Power Drive (3)
Morbs Taper (1)
Phillips Screw Drive (1)
Phillips® (8)
Round (1)
Screw (1)
Sel-O-FitВ® (1)
Slotted (12)
: Solid Brass (2)
: 1-1/2 in (1)
1-1/4 in (1)
: No (1)
: #3 (1)
#8 (1)
1 in (2)
1-1/2 in (1)
1-1/4 in (1)
1-1/8 in (2)
1-3/8 in (1)
1/2 in (5)
1/4 in (4)
2 in (2)
: 1-1/8 to 1-1/2 in (1)
1/4 - 3/4 in (1)
1/4 in, 1/4 in, 7 mm, 7 mm, 8 mm (5/16 in), 8 mm (5/16 in), 3/8 in, 3/8 in, 10 mm, 10 mm, 11 mm (7/16 in), 11 mm (7/16 in), 12 mm, 12 mm, 1/2 in, 13 mm (1/2 in) (1)
1/4 to 1 in (4)
1/4 to 1-1/2 in, 6 to 32 mm (1)
1/4 to 1/2 in, 7 mm to 13 mm (1)
1/4 to 15/16 in (1)
1/4 to 3/4 in (2)
1/4 x 5/16 in, 3/8 x 7/16 in, 1/2 x 9/16 in, 5/8 x 11/16 in, 3/4 x 7/8 in (1)
10 to 19 mm (3)
: 0.27 in (1)
0.29 in (1)
0.34 in (1)
0.39 in (1)
0.41 in (1)
0.45 in (2)
0.66 in (1)
1/2 in (1)
1/4 in (1)
13/32 in (1)
: Compound Action Straight and Left (3)
Offset Straight (1)
Offset Straight and Left Cut (2)
Straight Pattern (1)
Straight/Slight Curve (1)
: 0.264 in (1)
0.272 in (1)
0.28 in (1)
0.307 in (1)
0.315 in (1)
0.335 in (1)
0.339 in (1)
0.362 in (2)
0.366 in (1)
0.39 in (1)
: 1 in (10)
1-1/16 in (8)
1-1/2 in (9)
1-1/4 in (8)
1-1/8 in (14)
1-11/16 in (1)
1-13/16 in (2)
1-3/16 in (4)
1-3/4 in (1)
1-3/8 in (1)
: Deep (2)
Deep Length (92)
Deep well (1)
Hex (2)
Impact (73)
Long Ball End (1)
Long Length (5)
Magnetic Bolt Clearance Long (1)
Standard (2)
Standard Length (187)
: Yes (1)
: 12-Point (12)
12-Point 90 Tooth (1)
12-Point, 15 deg Offset, 72 Geared Teeth, Box End Drive (4)
12-Point, 15 deg Offset, Box/Open End Drive (7)
12-Point, 72 Geared Teeth, Flexible Head, Box End Drive (2)
12-Point, Box End Drive (4)
12-Point, Box/Open End Drive (2)
19.05 mm L x 0.8 mm W (1)
3-1/2 in Handle (1)
3-3/4 in Handle (2)
: ANSI Specified (13)
ANSI Specified, ASME B107.33M (1)
ANSI Specified|ASME B107.300 (1)
ANSI/ASME (8)
ANSI/ASME Specified (22)
ASME (1)
ASME ANSI (2)
ASME B1007.10 (2)
ASME B1007.10, ANSI Specified (2)
ASME B107-15 (15)
: 3-1/2 in (2)
6 in (2)
: 10 ft (1)
11 ft (1)
3 ft (1)
8 ft (1)
9 ft (1)
: Hex (1)
: 3/8 in (2)
7/8 in (1)
: 0.2 in (1)
0.24 in (1)
0.305 in (1)
0.31 in (1)
0.35 in (1)
0.42 in (1)
: 7 x 19 (3)
7 x 7 (1)
7 x 7 or 7 X 19 (1)
: Deep (2)
Hand Socket (1)
Knurled (1)
Open Stock (11)
Pin (1)
Straight (7)
: 12 Point, Rounded 6 Point, Spline, E-TorxВ® & Square Fastener (2)
18-3/4 in Ball Bearing Drill Chucks (1)
3/4 In Drive Ratchet Heads (1)
All Chucks With 3jt (1)
Grade 70 Chain (1)
Grade 80/100 Chain Slings (2)
Hex, Square, 12 pt, E-Torx®, Partially Rounded Hex and Spline Fastener (1)
Hex, Square, E-TorxВ®, Rounded Hex & Spline Fasteners (1)
Impact Driver And Wrench (1)
Locking Plier (1)
: Imperial (26)
Imperial/Metric (4)
Metric (20)
SAE (8)
SAE/Metric (2)
: 8.00 in (1)
: #4 to 1/2 in (1)
: Plug, Taper (4)
: Bright (4)
: High Speed Steel (4)
: 1/2-20 (1)
M12-1.75 (2)
M18-2.5 (1)
: 950 deg F (1)
: No (54)
Yes (4)
: Fine (1)
: 0.025 in (4)
0.07 in (1)
0.102 mm (1)
0.15 in (1)
0.152 mm (1)
0.195 in (1)
0.203 mm (4)
0.206 in (1)
0.25 in (1)
0.254 mm (3)
: NPT (4)
: 11 in (1)
3 in (1)
: Full Polished Chrome (1)
Polished Chrome (1)
: 1-1/4 in (1)
2-1/2 in (1)
3 in (1)
4 in (1)
4-1/2 in (1)
: Alloy Steel (22)
: 0.05 in (2)
0.156 in (3)
0.187 in (2)
0.1875 in (1)
0.25 in (1)
0.312 in (1)
0.375 in (1)
1 in (1)
1/16 in (2)
1/2 in (2)
: Angled (5)
Flat (4)
Flat Ground End/Indexing (1)
Ground (1)
Ground/Tapered (1)
Sharp (3)
: 1/2 in (1)
3-1/2 in (1)
7/8 in (1)
: 5/16 in (1)
: Kit (1)
: 0 to 150 ft-lb (1)
10 to 100 ft-lb (2)
100 to 600 ft-lb (1)
20, 150 ft-lb, 20.3 nm, 210.1 nm (1)
25 to 250 ft-lb (1)
30 to 250 ft-lb (3)
54.2 to 352.6 nm (1)
68 to 340 Nm (2)
: 3.3:1 (1)
: T10 to T60 (1)
T40 (1)
T50 (1)
: 1.5 to 10 mm (1)
2 to 8 mm (1)
T10 (1)
T10 to T40 (1)
: #1 (1)
#14 (2)
#16 (1)
#2 (1)
#2/0 (1)
#3 (1)
#35 (2)
#4 (1)
#50 (1)
#8 (1)
: 1-Piece (1)
1-Piece Sledge Head (1)
1-Piece Swivel Eye Single Sheave (2)
10-Position (1)
10-Way Slide (1)
100-Piece Heavy Duty (1)
12-Point (4)
12-Point Ratcheting (1)
12-Point, 72-Tooth (2)
2-Piece Internal (1)
: 120 V (1)
: 1 m/3.28 ft (1)
: 12 in (2)
: 0.2 in (1)
0.881 in (1)
0.9 in (1)
0.96 in (1)
1 in (1)
1-1/4 in (1)
1-1/8 in (2)
1-5/16 in (1)
1-5/32 in (1)
1/4 in (2)
: 3/32 to 1/8 in (1)
: 3/16 in (1)
: No (1)
: 0 to 0.5 in (1)
0 to 0.937 in (1)
0 to 1.125 in (1)
0 to 1.312 in (3)
0 to 1.5 in (2)
0 to 1.687 in (1)
0 to 2.062 in (1)
0 to 2.437 in (1)
0-2 in (1)
0-4 in (1)
: Combination (4)
Double End (1)
Non-Ratcheting (39)
Offset (2)
Open End (2)
Open End & Box End (1)
Open and Ratchet End (2)
Open/Box (2)
Ratcheting (52)
Ratcheting/Spline (1)