Bostwick-Braun Industrial | Replaceable Drill Tips

Site Search

My Cart (){0} items in cart

(){0} items in cart

Site Search

Filter

Search Within Category

: In Stock Only
: Replaceable Drill Tips (15)
: Iscar (5)
Sandvik Coromant (1)
Sumitomo Electric Industries (6)
Walter (2)
YG-1 Tool (1)
: 0.437 in (1)
0.484 in (1)
0.5472 in (1)
0.6890 in (1)
0.8661 in (1)
1/2 in (2)
12.5 mm (1)
16.5 mm (1)
19.5 mm (1)
20.5 mm (1)
: 140 (1)
140 deg (12)
142 deg (1)
: Carbide (3)
Carbide Tipped (2)
Solid Carbide (8)
Solid Carbide Tipped (2)
: PVD TiAlN Coated (1)
PVD-TiAlN Coated (1)
PVD-TiAlN+TiAl Coated (1)
TiAlCr/TiSi Coated (6)
TiAlN (2)
TiAlN Coated (4)
: ACX70 (6)
IC908 (4)
WMP35 (1)
WPP45C (1)
: FCP 0484 IC908 (1)
ICP 0437 IC908 (1)
ICP 0500 IC908 (1)
P6001-D25, 50R WPP45C (1)
P6003-D20, 50R WMP35 (1)
: Carbon Steel, Alloy Steel, High Alloyed Steel, Structural Steel, Tool Steel and Cast Iron (1)
Cast Iron, Hard Material, High Temperature Alloy, Steel and Stainless Steel (1)
Cast Iron, Hard Material, High Temperature Alloy, Steel, Stainless Steel (2)
Stainless Steel, Soft Steel, Gray Cast Iron, Low Rigidity Setups (4)
Stainless Steel, Steel, High Temperature Alloys and Titanium Alloys (1)
Steel (3)
Steel, Stainless Steel, Cast Iron, Hard Materials, Hi Temp Alloys (2)
: Right Hand (4)
: 4334 (1)
P (1)
P, K (1)
P, M, S (1)
: #12 (1)
#13 (1)
0.26 in (1)
12 (1)
E (1)
F (1)
: #CoroDrill 870 (1)
: 0.211 (1)
0.26 in (1)
0.276 in (1)
: 2 (2)
: ICM (1)
ICP-2M (1)
P6001 (1)
P6003 (1)
SMD (6)
SUMOCHAM (1)
Y03F Series (1)
: DCN R-3D, DCN R-1.5D, DCN A-5D, DCNS-5D Indexable Head Drill & MNCNT-T2 Modular Shank GunDrill (2)
DCN R-3D, DCN R-5D, DCN R-8D, DCN R-1.5D, DCN A-3D and DCNT Indexable Head Drill (1)
General Drill (1)
Xtra-tecВ® Point Drill (2)
: No (2)
Yes (8)
: Exchangeable Flat Bottom (1)
Flat Bottom (1)
Standard Tip, Normal Pressure (6)

Replaceable Drill Tips

Showing 15 items

Sort by

Results Per Page

content loaded

Iscar 5508287 Exchangeable Drill Head, 0.437 in Dia, 0.26 in Insert Seat, 140 deg Included Angl

Compare

Iscar 5508287 Exchangeable Drill Head, 0.437 in Dia, 0.26 in Insert Seat, 140 deg Included Angl

Part #

ISC5508287

MFG Part #

5508287

Iscar 5508788 Exchangeable Drill Head, 1/2 in Dia, 140 deg Included Angle, For Use With: DCN R-3D, DCN R-1.5D, DCN A-5D, DCNS-5D Indexable Head Drill & MNCNT-T2 Modular Shank GunDrill, Manufacturer's Grade: IC908, Through Coolant (Yes/No): Yes, TiAlN

Compare

Iscar 5508788 Exchangeable Drill Head, 1/2 in Dia, 140 deg Included Angle, For Use With: DCN R-3D, DCN R-1.5D, DCN A-5D, DCNS-5D Indexable Head Drill & MNCNT-T2 Modular Shank GunDrill, Manufacturer's Grade: IC908, Through Coolant (Yes/No): Yes, TiAlN

Part #

ISC5508788

MFG Part #

5508788

Iscar 5568104 SUMOCHAM Exchangeable Flat Bottom Drill Head, ANSI Code: FCP 0484 IC908, 0.484 in Dia, PVD-TiAlN Coated, #12 Insert Seat, For Use With DCN R-3D, DCN R-5D, DCN R-8D, DCN R-1.5D, DCN A-3D and DCNT Indexable Head Drill, PVD-TiAlN Coated

Compare

Iscar 5568104 SUMOCHAM Exchangeable Flat Bottom Drill Head, ANSI Code: FCP 0484 IC908, 0.484 in Dia, PVD-TiAlN Coated, #12 Insert Seat, For Use With DCN R-3D, DCN R-5D, DCN R-8D, DCN R-1.5D, DCN A-3D and DCNT Indexable Head Drill, PVD-TiAlN Coated

Part #

ISC5568104

MFG Part #

5568104

Standard Pack

1

Iscar Iscar 5507957 Replaceable Tip Drill, 1/2 in Dia, 12 Insert Seat, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Compare

Iscar Iscar 5507957 Replaceable Tip Drill, 1/2 in Dia, 12 Insert Seat, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Part #

ISC5507957

MFG Part #

5507957

Standard Pack

1

Iscar Iscar 5509622 Replaceable Tip Drill, 0.6890 in Dia, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Compare

Iscar Iscar 5509622 Replaceable Tip Drill, 0.6890 in Dia, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Part #

ISC5509622

MFG Part #

5509622

Sandvik Coromant 7357712 Replaceable Tip Drill, 0.5472 in Dia, #13 Insert Seat, 142 deg Included Angle, 4334 Grade, Through Coolant; No, TiAlN Coated

Compare

Sandvik Coromant

Sandvik Coromant 7357712 Replaceable Tip Drill, 0.5472 in Dia, #13 Insert Seat, 142 deg Included Angle, 4334 Grade, Through Coolant; No, TiAlN Coated

Part #

/SAN7357112

MFG Part #

7357712

SUMITOMO 5KHY175 Replaceable Tip Drill, 12.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY175 Replaceable Tip Drill, 12.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1250MTLACX70

MFG Part #

5KHY175

Standard Pack

1

SUMITOMO 5KHY191 Replaceable Tip Drill, 16.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY191 Replaceable Tip Drill, 16.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1650MTLACX70

MFG Part #

5KHY191

Standard Pack

1

SUMITOMO 5KHY199 Replaceable Tip Drill, 19.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY199 Replaceable Tip Drill, 19.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1950MTLACX70

MFG Part #

5KHY199

Standard Pack

1

SUMITOMO 5KHY212 Replaceable Tip Drill, 25 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY212 Replaceable Tip Drill, 25 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT2500MTLACX70

MFG Part #

5KHY212

Standard Pack

1

SUMITOMO U101352 Replaceable Tip Drill, 45/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO U101352 Replaceable Tip Drill, 45/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT07031MTLACX70

MFG Part #

U101352

Standard Pack

1

SUMITOMO U101375 Replaceable Tip Drill, 63/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO U101375 Replaceable Tip Drill, 63/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT09844MTLACX70

MFG Part #

U101375

Standard Pack

1

Walter 5656200 Replaceable Tip Drill, 20.5 mm Dia, E Insert Seat, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P, M, S Grade, Manufacturer's Grade: WMP35, PVD TiAlN Coated

Compare

Walter 5656200 Replaceable Tip Drill, 20.5 mm Dia, E Insert Seat, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P, M, S Grade, Manufacturer's Grade: WMP35, PVD TiAlN Coated

Part #

WAL5656200

MFG Part #

5656200

Walter 6306805 Replaceable Tip Drill, 25.5 mm Dia, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P Grade, Manufacturer's Grade: WPP45C, PVD-TiAlN+TiAl Coated

Compare

Walter 6306805 Replaceable Tip Drill, 25.5 mm Dia, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P Grade, Manufacturer's Grade: WPP45C, PVD-TiAlN+TiAl Coated

Part #

WAL6306805

MFG Part #

6306805

Standard Pack

1

YG-1 i-Dream Y03F01 Drill Insert, 0.8661 in Dia, F Insert Seat, 140 deg Included, For Use With General Drill, P, K Grade, TiAlN Coated

Compare

YG-1 i-Dream Y03F01 Drill Insert, 0.8661 in Dia, F Insert Seat, 140 deg Included, For Use With General Drill, P, K Grade, TiAlN Coated

Part #

YG1Y03F01

MFG Part #

Y03F01

Standard Pack

1

Iscar 5508287 Exchangeable Drill Head, 0.437 in Dia, 0.26 in Insert Seat, 140 deg Included Angl

Compare

Iscar 5508287 Exchangeable Drill Head, 0.437 in Dia, 0.26 in Insert Seat, 140 deg Included Angl

Part #

ISC5508287

MFG Part #

5508287

Iscar 5508788 Exchangeable Drill Head, 1/2 in Dia, 140 deg Included Angle, For Use With: DCN R-3D, DCN R-1.5D, DCN A-5D, DCNS-5D Indexable Head Drill & MNCNT-T2 Modular Shank GunDrill, Manufacturer's Grade: IC908, Through Coolant (Yes/No): Yes, TiAlN

Compare

Iscar 5508788 Exchangeable Drill Head, 1/2 in Dia, 140 deg Included Angle, For Use With: DCN R-3D, DCN R-1.5D, DCN A-5D, DCNS-5D Indexable Head Drill & MNCNT-T2 Modular Shank GunDrill, Manufacturer's Grade: IC908, Through Coolant (Yes/No): Yes, TiAlN

Part #

ISC5508788

MFG Part #

5508788

Iscar 5568104 SUMOCHAM Exchangeable Flat Bottom Drill Head, ANSI Code: FCP 0484 IC908, 0.484 in Dia, PVD-TiAlN Coated, #12 Insert Seat, For Use With DCN R-3D, DCN R-5D, DCN R-8D, DCN R-1.5D, DCN A-3D and DCNT Indexable Head Drill, PVD-TiAlN Coated

Compare

Iscar 5568104 SUMOCHAM Exchangeable Flat Bottom Drill Head, ANSI Code: FCP 0484 IC908, 0.484 in Dia, PVD-TiAlN Coated, #12 Insert Seat, For Use With DCN R-3D, DCN R-5D, DCN R-8D, DCN R-1.5D, DCN A-3D and DCNT Indexable Head Drill, PVD-TiAlN Coated

Part #

ISC5568104

MFG Part #

5568104

Standard Pack

1

Iscar Iscar 5507957 Replaceable Tip Drill, 1/2 in Dia, 12 Insert Seat, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Compare

Iscar Iscar 5507957 Replaceable Tip Drill, 1/2 in Dia, 12 Insert Seat, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Part #

ISC5507957

MFG Part #

5507957

Standard Pack

1

Iscar Iscar 5509622 Replaceable Tip Drill, 0.6890 in Dia, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Compare

Iscar Iscar 5509622 Replaceable Tip Drill, 0.6890 in Dia, 140 deg Included Angle, Manufacturer's Grade: IC908, TiAlN Coated

Part #

ISC5509622

MFG Part #

5509622

Sandvik Coromant 7357712 Replaceable Tip Drill, 0.5472 in Dia, #13 Insert Seat, 142 deg Included Angle, 4334 Grade, Through Coolant; No, TiAlN Coated

Compare

Sandvik Coromant

Sandvik Coromant 7357712 Replaceable Tip Drill, 0.5472 in Dia, #13 Insert Seat, 142 deg Included Angle, 4334 Grade, Through Coolant; No, TiAlN Coated

Part #

/SAN7357112

MFG Part #

7357712

SUMITOMO 5KHY175 Replaceable Tip Drill, 12.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY175 Replaceable Tip Drill, 12.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1250MTLACX70

MFG Part #

5KHY175

Standard Pack

1

SUMITOMO 5KHY191 Replaceable Tip Drill, 16.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY191 Replaceable Tip Drill, 16.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1650MTLACX70

MFG Part #

5KHY191

Standard Pack

1

SUMITOMO 5KHY199 Replaceable Tip Drill, 19.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY199 Replaceable Tip Drill, 19.5 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT1950MTLACX70

MFG Part #

5KHY199

Standard Pack

1

SUMITOMO 5KHY212 Replaceable Tip Drill, 25 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO 5KHY212 Replaceable Tip Drill, 25 mm Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT2500MTLACX70

MFG Part #

5KHY212

Standard Pack

1

SUMITOMO U101352 Replaceable Tip Drill, 45/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO U101352 Replaceable Tip Drill, 45/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT07031MTLACX70

MFG Part #

U101352

Standard Pack

1

SUMITOMO U101375 Replaceable Tip Drill, 63/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Compare

Sumitomo Electric Industries

SUMITOMO U101375 Replaceable Tip Drill, 63/64 in Diameter, 140 deg Included Angle, Manufacturer's Grade: ACX70, Yes Through Coolant, TiAlCr/TiSi Coated

Part #

SUMSMDT09844MTLACX70

MFG Part #

U101375

Standard Pack

1

Walter 5656200 Replaceable Tip Drill, 20.5 mm Dia, E Insert Seat, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P, M, S Grade, Manufacturer's Grade: WMP35, PVD TiAlN Coated

Compare

Walter 5656200 Replaceable Tip Drill, 20.5 mm Dia, E Insert Seat, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P, M, S Grade, Manufacturer's Grade: WMP35, PVD TiAlN Coated

Part #

WAL5656200

MFG Part #

5656200

Walter 6306805 Replaceable Tip Drill, 25.5 mm Dia, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P Grade, Manufacturer's Grade: WPP45C, PVD-TiAlN+TiAl Coated

Compare

Walter 6306805 Replaceable Tip Drill, 25.5 mm Dia, 140 deg Included Angle, For Use With: Xtra-tec® Point Drill, P Grade, Manufacturer's Grade: WPP45C, PVD-TiAlN+TiAl Coated

Part #

WAL6306805

MFG Part #

6306805

Standard Pack

1

YG-1 i-Dream Y03F01 Drill Insert, 0.8661 in Dia, F Insert Seat, 140 deg Included, For Use With General Drill, P, K Grade, TiAlN Coated

Compare

YG-1 i-Dream Y03F01 Drill Insert, 0.8661 in Dia, F Insert Seat, 140 deg Included, For Use With General Drill, P, K Grade, TiAlN Coated

Part #

YG1Y03F01

MFG Part #

Y03F01

Standard Pack

1

Results Per Page