Simpson Strong-Tie® Strong-Rod™ SET-XP22-N SET-XP® High Strength Epoxy Adhesive With Nozzle and Extension, 22 oz Side-By-Side Cartridge, Liquid/Paste Form, Black/Green/White, 1.21/1.59
Simpson Strong-Tie® Strong-Rod™ Epoxy Adhesive, High Strength, Series: SET-XP®, Side-By-Side Cartridge Container, 22 oz Container, Epoxy Base, Composition: (Resin White Side)-Bisphenol A-Epichlorohydrin, Phenol, Polymer With Formaldehyde, Glycidyl Ether, Butyl Glycidyl Ether, Titanium Dioxide, (Hardener Black Side)- Silica, Crystalline Quartz, Polyamido Amine, 2,4,6-Tris Dimethylaminomethyl) Phenol, Dimethyl Silicone Polymer With Silica, Phenol, Benzene-1,3-Dimethaneamine, 3,6,9-Triazaundecamethylenediamine, Liquid/Paste Form, 24 hr at 70 deg F, 72 hr at 50 deg F Curing, Black/Green/White, Ammonia/Sweet Odor/Scent, 1.21/1.59 Specific Gravity, 250/262 deg F Flash Point, 6.9/10.3 pH, 0.0423611111 Mixing Ratio, 3 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete and Masonry
- Water and Sewage Treatment
- 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
- Code listed under the IBCor IRC for cracked and uncracked concrete per ICC-ES ESR-2508
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Easy hole cleaning no power-brushing required
- Suitable for use in dry or water-saturated concrete
- For best results, store between 45 to 90 deg F
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Multiple dot listings
- Surfaces to receive epoxy must be clean
- Base material temperature must be 50 deg F or above at the time of installation, for best results, material should be between 70 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Do not immerse cartridges in water to facilitate warming
- Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
- Use only appropriate Simpson Strong-Tie® mixing nozzle in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair epoxy performance
- The load tables list values based upon results from the most recent testing and may not reflect those in current code reports
- Passed, non-sag consistency
- 155 deg F glass transition temperature
Applicable Materials Grouted Concrete Block, Cracked Concrete and Masonry Base Type Epoxy Color Black/Green/White Flash Point 250/262 deg F Form Liquid Odor/Scent Ammonia/Sweet pH Range 6.9/10.3 Series SET-XP® Specific Gravity 1.21/1.59 Type High Strength VOC Content 3 g/L Container Size 22 oz Container Type Side-By-Side Cartridge Curing Time 24 hr at 70 deg F, 72 hr at 50 deg F Mixing Ratio 1:1